You can reset the oil life on the 2013 Hyundai Tucson in a couple different ways. Before You do so You will need to make sure You are parked in a safe space. The first and easiest way You can reset it is just by turning the ignition to the on position without starting the vehicle and pressing the gas pedal down slowly 3 times and then start the vehicle. If that did not work You can try doing it by putting the ignition to the on position and using the menu on the speedometer. Use the buttons on the steering wheel to get to the service required menu on the speedometer. Then hold the ok button down to reset it and then turn the vehicle to off and then start it.
Jodi W
July 16, 2020
To reset the oil level warning or maintenance light in your 2013 hyundai tucson vehicle, turn the ignition key to the "on" position and depress the gas pedal slowly three times. Release and start your vehicle and the oil light should indicate a reset.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.