To reset the TPMS for the 2014 Kia Forte firSTSet the recommended tire pressure. According to the owner's manual the cold tire inflation pressure iS32 psi for both the front and rear tires. If You have replaced a sensor, use an OBD scan tool, scan the sensors in each tire starting with the left front then right front, rear right, left rear. You should also scan the full-size spare if You have one. Turn the ignition to the ON position. Connect Your scan tool to the OBD-II port which is located under the dash on the driver side. Once the sensor IDs have been uploaded turn the ignition OFF and scan them again. Drive for at least 10min at a speed of 30mph then check that the pressure in each tire is at the recommended level. Engage the parking brake and turn the ignition to the ON position once more. Press and hold the pressure warning reset switch until You see the TPMS indicator blink three times.
Hermes N
September 20, 2022
Hi My car doesn't have a reset bottom, what I can do? Thank you.
Armando
November 24, 2022
Hola me puedes decir cual es el boton de reinicio? Gracias
Kathy G
July 16, 2020
To reset the tpms on the 2014 kia forte make sure the tire pressure is correct, then turn on the vehicle. Now hit the reset button that is to the right of the steering wheel and wait ten minutes. In some cases you may need to hold the button down till the light flashes. If the sensor is not working correctly then you may have tires with incorrect pressure, and the car can get bad performance.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.