To reset the TPMS in the 2015 Toyota 4Runner You'll need to first make sure the tire pressure for each tire is correct. The suggested pressure for both the front and rear tires iS32 psi. Next, turn on the engine. Press and hold the reset button which is located on the lower right hand side of the instrument panel just to the right of the steering wheel. Continuing holding the button until You see the TPMS indicator light blink 3 times. The system will then record the tire pressure from each tire. Allow for several minutes to complete the process. Confirm that the reset work by turning off the ignition then starting the engine again.
Sharon M
July 16, 2020
To reset the tpms on the 2015 toyota 4runnermake sure the tire pressure is correct, then turn on the vehicle. Now hit the reset button that is to the right of the steering wheel and wait ten minutes. In some cases you may need to hold the button down till the light flashes. If the sensor is not working correctly then you may have tires with incorrect pressure, and the car can get bad performance.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.