How do i perform the 2017 Jeep Wrangler reset oil life remaining?

eyeOutline 17706 messagesOutline 4
commentMultiple Submit An Answer
star Top Answer
accountCircle
Naya Y. December 25, 2020
There are two methods You can try to reset the oil life on the 2017 Jeep Wrangler. For both methods You will first turn the ignition to ON without starting the engine. Continuing with method 1, use Your steering wheel controls to navigate to "Vehicle Info" on Your display then select "Oil Life". Press the OK button and release once the oil life is set to 100 percent. In method 2, press down the accelerator three times in a row within ten seconds. Turn the ignition to the OFF position. This particular method may need to be attempted a few times before the oil life message goes away. Depending on Your diving habits, the oil and oil filter interval will fall between every 3,000 and 5,000 miles. 5.9 quarts of SAE 5W-20 full synthetic motor oil is required.
accountCircle
Pablo L July 16, 2020
To reset the oil life on the 2017 jeep wrangler, turn the key to on, press on the accelerator slowly 3 times in a span of 10 seconds, then turn ignition to off.
accountCircle
Rachel January 27, 2022
The accelerator three times worked perfectly
accountCircle
Kinny Watson February 2, 2022
Turn the ignition to on (do NOT start engine) push the gas pedal three times nice and easy. Turn off ignition. Oil life should reset to 100%
Leave your answer
Name
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com does not research or authenticate any of the Answers provided.