To reset the tire pressure sensor on the 2019 Ford F-250 You will need a scan tool and You will need to park in a safe spot and make sure the tire pressure on the tires are right. The tire pressure should be 65 to 75 psi for the front and 80 psi for the rear LT245/75R17/E tires, 60 to 70 psi for the front and 80 psi for the rear LT265/70R17/E tires, 60 to 70 psi for the front and 75 psi for the rear LT275/65R18/E tires and 60 psi for the front and 65 psi for the rear LT275/65R20/E and LT275/70R18/E tires. Next turn the ignition to off and release the brake pedal. Turn the ignition from the OFF to RUN position 3 times, ending in the RUN position. Press and release the brake pedal and then turn the ignition to off. Again, turn the ignition from the OFF to RUN position 3 times, ending in the RUN position. Then use the TPMS scan tool to scan each sensor on the tire starting at LF, RF, RR, LR. Then turn the ignition off and start it.
To reset the tire pressure monitor or tpms system in your 2019 ford f250 vehicle, turn the ignition key to the "on" position and depress the tpms button, usually located under the dash, until the tpms light blinks several times. Start your vehicle and let it run for at least 20 minutes and your tpms system should be reset.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.