The purpose of the TPMS on Your 2013 FIAT 500 is to warn You that one or more tires is under-inflated which could produce premature tire wear, tire failure, and unsafe driving conditions. To perform a reset of the TPMS only takes a few moments. First, turn the ignition to the "On/Run" position and then use the "Menu" button to select "Vehicle Information." Scroll to the "Tire Pressure" menu and then press the "SET/CLR" button. Now go through each tire, adjusting the pressure as needed until the horn sounds. After You go through all 4 tires the horn will sound twice. Finally, turn the ignition to the "OFF" position. You have completed the procedure.
To reset the 2013 fiat 500 tpms, it will be revised automatically until the tires are on the right psi and the tire pressure monitoring telltale light will be turned off once the machine receives the modified tire pressures. The car may need to be driven for up to 20 minutes over 15 mph (24 km / h) to obtain this information from the tpms.
GT Evo
September 22, 2022
Is no vehicle information
GT Evo
September 22, 2022
I have 2013 Abarth.Under Menu, there
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.