To reset the maintenance light on the 2016 Toyota Camry You should first park in a safe space that is out of the way. The first thing You need to turn is turn the key to the on position without starting the car. The on position is the the key position right before starting the vehicle. After doing that find the odometer button which is on the dashboard and then push and hold the button while turning the key to the next position. Keep holding the odometer button for at least 10 seconds and while doing so the light will start to flash and You might hear a beep and then the light should go off. Once the light goes off, release the button and then start the vehicle and it will be reset.
Henry A.
April 13, 2020
Th following instructions to reset the required maintenance light on your toyota camry are: switch the ignition switch to the "on" spot, but do not start the engine if your car has a start push button, press the "start" button without touching the brake pedal. Briefly click the odometer knob until you see "trip a
Eva R.
April 9, 2020
Insert the key into the ignition and turn to position one. Press and hold the odometer button. Put the key in position two and continue to hold down the odometer for another ten seconds.
John C.
April 9, 2020
To reset the maintenance required light on a 2016 toyota camry, press and hold the odometer button down on the dashboard. Put the key to position 2. Hold the odometer button until the light goes out.
Bob h
February 26, 2022
Eva r gave the answer that worked thank you
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.