To reset the tpms on the 2016 Toyota Sienna You first need to park in a safe spot and make sure the tire pressure in the tires is correct. The tire pressure iS36 psi for the front and rear P235/50R19 tires and 35 psi for the front and rear P235/55R18 and P235/60R17 tires. Next turn the engine to the on position without starting the vehicle. After doing all of that find the TPMS reset button which is below and to the left of the steering wheel on the instrument panel. Press and hold the TPMS button until the TMPS light slowly blinks three times. Wait for several minutes and then turn the vehicle off and then start it.
Dan N.
April 9, 2020
To reset the tpms on your 2016 toyota sienna, you need to first make sure that the tire pressure is correct on your tires, then turn the engine on. Press and hold the reset button, hold the button until the tpms indicator light blinks slowly 3 times.
The reset button a 2016 Sienna does not do anything. The TPMS light blinks for about a minute after the vehicle is in the 'ON' position (pushing the start button twice gets to the 'ON' position without starting the vehicle). When pressing the 'SET' button underneath the steering wheel for 5 seconds to reset the TPMS light, it does nothing. It does NOT let the TPMS light flash three times. I even tried pressing the reset button for 10 seconds, but that also did not do anything. I have read many threads and watched numerous YouTube videos on how to reset the TPMS light and I know that I'm NOT doing it incorrectly. Please advise on how to reset the TPMS light.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.