To reset the oil life light in the 2010 Hyundai Sonata You will start by getting the engine started. If a service is due, "Service needed" is displayed on the board. Locate and click the OK button located at the top right of the steering wheel for longer than 1 second to reset this alert. It will restore the operation frequency to the default state. The duration of the indicator can be changed by going to the settings and changing it. The default setting is listed at 7,000 miles for the oil change indicator to illuminate. Getting oil changes is one of the most important fluids to be replaced int he vehicle so You should always pay close attention and have the oil changed at appropriate times.
Nellie F.
April 10, 2020
To change the oil on the 2010 hyundai sonata you need to pull the plug and let it drain out, it will take about an hour, then you need to put the plug in and put fresh oil in. To put more oil in simply pour the oil into the hole on the top of the oil pan.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.