To reset the oil on the 2014 Acura RDX is simple and takes a few minutes. What you're going to want to do first is set the power mode to the ON position. Then, press the INFO button and go to Customize Settings. You will now select Customize Settings by pressing the SEL/RESET button. After, select Maintenance Info using the same SEL button. When you see the oil life, select Reset in the menu and press the SEL button one more time. You should get a message saying the oil life is at 100%. Once you get that message, go ahead and turn the ignition off. You are now good to go.
Raymond P.
April 10, 2020
To reset the 2014 acura rdx maintenance light, turn the ignition on (ii)-do not start the engine. Click the sel / reset button on the steering wheel repeatedly until the engine's oil life is clear. Click and hold the sel button for more than ten seconds. The remaining engine oil life reset mode will be seen on the multi- display. Select reset by clicking the info (up / down) button, and then click the sel / reset button to restore the life of the engine.
John Moore
June 9, 2020
Gungho
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.