To progRam the key fob on Your 2013 INFINITI G37, go ahead and sit inside of Your car and lock Your doors. Put Your key into the ignition and remove it SRX times in a span of 10 seconds. After the 6th time, You should see Your hazard lights flashing. Now, go ahead and put the key back into the ignition and go into the accessories settings. Press any button on Your key fob as soon as You insert the key into the ignition. Once You see the hazard lights flash again then You will know that the key fob is now progRammed into Your vehicle. Unlock Your doors with the switch on Your door then press any button on Your key fob. It's not safe to turn the ignition off and You're done.
These instructions make no sense for FOB users- how can you push any button on the remote when the remote is in the slot ? This might work if you have a KEY and it's inserted into a KEY IGNITION. T
Israel B
July 16, 2020
In order to configure the 2013 infiniti g37 key fob, you must sit in the driver's seat and lock both doors. Open both doors using the power lock mechanism on the driver's side. Push the key into the ignition and detach it from the ignition. Do so at least six times in ten seconds. Place the key in the ignition and switch the ignition to the "accessories" mode. Click any button on the remote within five seconds of inserting the switch. Unlock and then load the doors using the driver's side load switch. To stop the programming mode, turn the ignition to the "off" spot.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.