The Ford Fousion door code can be reset but You will have to have the vehicle's factory set code. You will enter that set code and press 1, 2, and enter Your desired 5-digit code. Then, You will press 1 to complete the process. If You do not have the code You can usually find it in the owner's manual on a card labeled door code etc.. You can also get it from the BCM under the dash it will be located just above the brake pedal in the driver's side footwell. If all else fails You can take it to the dealership and they will be able to pull the default factory code that is stored in the PCM.
If you have the regular key not the push button start.... You can find the code by put the first key in and turning it to accessory for 4 second take that key out and put in the second key and turn to accessory for 4 seconds the factory code will display on the odometer display.
Richard A.
April 10, 2020
You can reset the ford fusion door code by entering in the factory-set code, then you can press 1-2. Enter your new personal 5 digit code, then press 1. Unlock driver's door and enter either your factor set 5 digit code or your new personal code.
Dan D.
April 10, 2020
To reset the ford fusion door code, enter your vehicle's factory-set code, press 1, then 2, enter your desired 5-digit code, then press 1 to complete.
Mike G.
June 14, 2023
I had a 2014 Ford Fusion Titanium EcoBoost. I found mine behind the fuse box, behind the panel under the headlight switch. Back, back up in there. I was able to use a mirror that was on a pivot. I loosened the bottom bolt enough, but not all the way out. Took some maneuvering but it didn't really take me that long once I got it to where I needed it. Now all you have to do is learn how to read backwards.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.