There are a couple ways to reset the oil light on the 2010 Ford F-150, one being doing it with the message center and the other doing it without. For without the message center the first thing You need to do is park it in a safe space and turn the ignition to the on position. Then press the select/reset stem button to display the message OIL LIFE = % HOLD RESET = NEW. Press and hold the select/reset stem button for 2 seconds to reset to 100% and then turn the ignition off. To do it with the message center the first thing You need to do is safely park and turn the vehicle to the run position. Find the controls to the left of the steering wheel and scroll through the menu with them. Use the up and down buttons to find settings and then vehicle. Select "OIL LIFE RESET %" and then select ok to reset and then turn the ignition off.
Francis S.
April 9, 2020
On the 2010 ford f-150, to reset the oil light follow these steps: press and hold the select/release knob on your dashboard until it reads "oil life x*x%"." Hold the reset button and you will see "new."
Irene J.
April 13, 2020
Turn the ignition on without turning on the engine. Press both the break and gas pedals at the same time. After a few seconds the screen should say "service: oil reset in prog." Keep pressing down on the break and gas for about 25 seconds until the screen says "service: oil reset complete". Release the pedals and turn off the car.
Eric
November 4, 2021
Push the odometer reset to cycle through to engine oil life is displayed, press and hold to reset
John
March 21, 2023
¹where the button oil locat on 2010 150 ford truck
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.