You can reset the Ford Fusion door code, but You need the factory-set code of the car. You enter the set code and click 1, 2, and enter the 5-digit code You like. You will then press 1 to finish the process. If You do not have the code, You will usually find it on a card labeled door code etc. In the owner's manual. You can also get it under the dash from the BCM, which will be positioned just above the brake pedal in the side footwell of the driver. You should take it to the dealer if anything else fails and they will be able to pull out the default factory code contained in the PCM.
Glenn M.
April 10, 2020
To reset the ford escape door code. Enter the permanent keyless entry code on the numeric keypad. The keypad is located on the driver's door, just under the handle. Press the number 1 on the keypad. Enter your new keyless entry code immediately. Press the number 1 and listen for the sound of the doors being locked.
Robsay
September 12, 2021
Under the gear shift is the door lock module with the factory code that never changes.
Betty F.
April 10, 2020
To reset the ford escape door code, firstly, press and release the 1*2 key. Make sure you press this key within five seconds of entering the factory-set code. Now, enter your new personal code by pressing the keys firmly. The reset door code should be completed.
BOB MUSKE
March 12, 2022
DEALERSHIP issue or READ thee MAUL about RECODING the entry buttons
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.