What are some of the chrysler pacifica liftgate problems?

If the Chrysler pacifica liftgate is not working then there are a few reasons. You may be low on hydraulic fluid, which is an easy fix. The lift may be rusted or broken and does not work. Most likely though the fuse to the motor is burnt out. To get to the fuse box underneath the hood of the car You will want to pop the hood and latch it open. Along the right-hand side of the engine compartment will be a black box or case. You will see that it has a seam that runs around it. If You pop this open You will find the fuse inside. On the back of the lid for the case will be a diagram of what fuse is for what. If this is not on the back of the box then You can also find it in the owner's manual for the car. Once You have figured out which fuse You need simply pull it out. The two sections that stick up should be connected by a thin strip of metal. If this has been broken then the fuse is no good and will need to be replaced. If this strip is there then the fuse is fine and can be popped back in. New fuses will cost You about 10 dollars, so they are pretty cheap