If there is no power to the fuel pump fuse then the fuse has burnt out. To get to the fuse box look to the left of the steering wheel look for a small seam or crack along the dash. Using a screwdriver or prybar You will want to pop this open. On the inside, You will find a bunch of fuses. On the back of the panel that You pulled open, You will see a diagram that will show You what each of the fuses is for. If this is not on the back of the panel then You can also find it in the owner's annual for the vehicle. Once You have figured out which fuse You need simply pull it out. The two sections that stick up should be connected by a thin strip of metal. If this has been broken then the fuse is no good and will need to be replaced. If this strip is there then the fuse is fine and can be popped back in. New fuses will cost You about 10 dollars, so they are pretty cheap.
dan
February 12, 2022
Mike E., the question was TO the fuel pump fuse not FROM the fuel pump fuse - please try to pay attention.
Nathan W.
April 9, 2020
An electrical issue with a fuel pump fuse have been blown out can cause no power in the 2007 chevy silverado.
Elliott
June 22, 2023
I have the same problem 97 Sierra no power to fuse. Having no luck so far
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.