The wheel bolt pattern for the 2002 Ford Expedition iS5x135mm for both the 4.6 L V8 and the 5.4 L V8 engine. A wheel bolt pattern is the pattern that is used to bolt a wheel/rim to the vehicle. It is measured in mm so 5x135mm means that there iS5 holes and the diameter through those holes is 135mm. The Expedition has a thread size of M14 X2.0, a center bore of 87.1 mm and it uses lug nuts as the wheel fasteners. The wheel size of the SUV is 16 to 17 inches in diameter and 7 inches in width. It has tire sizes of 255/70R16 and 275/60R17 for the 2wd, 255/70R16 and 265/70R17 for the 4WD, 275/60R17 for the Eddie Bauer 2wd and 265/70R17 for the Eddie Bauer 4wd.
Katherine R
July 16, 2020
The wheel bolt pattern on a 2002 ford expedition is 5x114.3 Mm.
1997 to 2002 Ford Expedition F 150 and lincoln Navigator and Blackwood is 5 x 135 everything after that as far as expedition and trucks is 6 lug CARS are 5 x 114.3
The 5x135 bolt pattern is a pattern introduced by Ford starting in 97. It is specifically only used from 97-03 on the Ford F150, Ford Expedition, etc. A few 04 models have it as well, but most changed over to the 6 bolt setup at that time. These era Fords also have a lower factory wheel offset than the newer models.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.