What's the 2008 Chevy Impala transmission control module location?

The transmission control module in the 2008 Chevy Impala is located inside the air filter housing. To get to it You have to remove the support bar from the front driver side of the engine compartment, there'S4 bolts and You need a 13-millimeter socket to remove them. Using a regular screwdriver, loosen the Hose clamp and then disconnect the electrical connector on top of the hose coming out the air box. Unclip the air filter housing, there's two on top and two on each side. Once You separate the housing, look on the right side at the bottom, You will see the control module right next to the PCM. That TCM will pull straight up and out of the socket there will be a blue electrical connector. Push down on the blue tab and rock the grey lever back, this will release the electrical connection.