What's the 2013 Dodge Challenger oil pressure sensor location?

The oil pressure sensor in a 2013 Dodge Challenger is located below the lower Internet manifold. This can be a complicated job to replace, You will have to take the upper and lower intakes off of the engine. The first thing You will need to do is lift off the plastic engine cover, it just pulls up and then set it out of Your way. Next remove the air inlet, disconnect it from the air filter housing and the throttle body. Unplug the electrical connectors and hoses going to the throttle body and upper intake then take off the upper intake, there is several 8mm bolts on each side of it. Now You are going to have to take off the fuELRail, coil packs and injectors to get to the lower intake. Once the lower intake is out of the vehicle You will see the oil pressure sensor right between the intake ports.