What's the dodge challenger lug pattern?

The Dodge Challenger has A5 lug by 115 mm wheel bolt pattern. This means that there are 5 wheel studs spaced out at 115 mm from the edge of one to the center of the one diagonally across from it. The Challenger useS50 mm long, M14 X1.5 studs with a 16.02mm knurl. The factory recommended torque for tightening the lugs is 135 Ft-lbs. Tighten them working in a crisscross pattern, this ensures the tire goes on squarely. An under torqued lug could cause the tire to shake and damage a stud, eventually leading to the tire falling off. Over torqueing could warp the rotor and have adverse effects on the drivability.