The 2014 Honda CR-V radio display not working is due to the fuse boxBeing bad. To get to the fuse box underneath the hood of the car You will want to pop the hood and latch it open. Along the right-hand side of the engine compartment will be a black box or case. You will see that it has a seam that runs around it. If You pop this open You will find the fuse inside. On the back of the lid for the case will be a diagram of what fuse is for what. If this is not on the back of the box then You can also find it in the owner's manual for the car. Once You have figured out which fuse You need simply pull it out. The two sections that stick up should be connected by a thin strip of metal. If this has been broken then the fuse is no good and will need to be replaced. If this strip is there then the fuse is fine and can be popped back in. New fuses will cost You about 10 dollars, so they are pretty cheap
This fixed my problem. Thank you! The fuse was fine so I put it back in thinking I still needed to find the problem, but when I restarted my car the screen was working. I tried many things before I found your solution. Yours was the one that worked. Thank you Mike E.
William N
July 16, 2020
The radio or radio display may stop working in your 2014 honda crv vehicle due to a blown fuse, a troubled ecu or faulty under dash wiring, a common culprit.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.