Will jeep wrangler rims fit dodge ram 1500?

eyeOutline 20222 messagesOutline 11
star Top Answer
accountCircle
James B. December 28, 2020
The Jeep Wrangler rims won't fit on a Dodge Ram 1500. Making sure Your tires are in the greatest of condition is crucial to not crashing. You will come into problems with this car part at some time or another. Premature tire wear is something You could face. You could run into feathering issues. You could face cupping problems. Make sure to check the tire pressure once a month. Check for holes, in case You run over a pothole. The part may become loose at some point. This part will need to be replaced eventually. You don't want to get into any wrecks on the highway. You should replace Your tires every 30,000 to 50,000 miles.
accountCircle
Bob m July 28, 2020
If Jeep jk has 5.5 and ram 1500 has 5.5 what is the difference
accountCircle
Bob m September 11, 2020
The jk and rubicon have 5.5 bolt pattern why is it not comparable?
accountCircle
This guy February 15, 2022
I'm about to give it a go.. I'lldo my best to get back on here and let ya know my situation after.
accountCircle
Stephen D. April 10, 2020
No, there is too much difference in the bolt pattern for the jeep wrangler rims to fit the doge ram 1500.
accountCircle
Dan November 10, 2020
The wrangler has5X5.5
accountCircle
* BuildItLikeBeal August 4, 2020
I doubt the wrangler has a 5x5.5 bolt pattern. It's probably a 5x4.5 or if it's really new, a 5x5. If both vehicles are 5x5.5 then the they will bolt up fine. The difference is the hub diameter. Older jeeps with the 5x5.5 have a large hub diameter. You would have to check the wheel opening diameter and the hub diameter on your vehicle to see if they will fit.
accountCircle
Dan November 10, 2020
I was wrong Ram is 5X5.5 jeep5X5
accountCircle
Franky September 20, 2023
Jeep rims wrangler wont fit a dodge ram1500 the bolt pattern on the Jeep is a little bit more tighter (confirmed) I had to return the rims i bought
accountCircle
Alejandro Chavez September 9, 2022
Did anyone confirm if they fit?
accountCircle
nick May 2, 2021
As long as your pattern is the same ie 5 x 5, all you will need is a hubcentric ring. Alot of your lower end wheels will have these hubcentric rings to allow for a variety of vehicle applications
Leave your answer
Name
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com does not research or authenticate any of the Answers provided.