To reset the Oil Change Required message in a 2018 Dodge Grand Caravan, start by turning the ignition to the ON/RUN position, without starting the engine. Next, slowly press the gas pedal all the way down three times within 10 seconds. Finally, turn the ignition to the OFF/LOCK position. If the light comes back on when You start the van, You will have to repeat this process. You should only reset the oil message after having the oil and filter changed. The Grand Caravan holdS6 Quarts of Mopar SAE 5W-20 engine oil or an equivalent that meets FCA Material Standard MS6395 certifications. Conventional or Synthetic oils can be used, if they meet the quality requirements.
William M.
April 13, 2020
Okay with a 2018 dodge grand caravan turn the ignition key to position on
Is this real to turn off the change oil light? What triggers it in the first place?
Clay
September 16, 2022
Ive done this ign on, three slow complete press and release, ign off, four times now and it still says change oil on the screen. I just changed the oil
Clay
September 16, 2022
Nevermind. It has to be in the on position not the second position which is acc.
Samantha M.
April 9, 2020
To reset the change oil light on a 2018 dodge grand-caravan, first you have to turn the car on without starting the engine. Then, within 10 seconds, you have to slowly depress the accelerator pedal 3 times in a row. After that you turn the ignition back off. Repeat if needed.
Frank
October 6, 2021
Turn on the ignition without starting the car. Press the gas pedal three times, switch off and then start the vehicle.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.