If You want to reset the check engine light on the 2012 Ford Focus, I can help guide You. What You will need is an OBD II scanner which is not too expensive at an auto parts store. First thing You will want to do is put Your key in the ignition and turn on ON. Now, insert the OBD II scanner into Your vehicle's OBD II port. You will now follow the directions on the screen to reset the check engine light. Once done, turn the ignition to OFF. If You want to make sure that the light has been reset, turn the ignition to ON again and watch for the check engine light location, it should be off.
Kevin J.
April 9, 2020
To reset the check engine light on the 2012 ford focus, first turn off the ignition, making sure all doors are closed. Next turn the ignition to position 2. Now press the accelerator and brake pedal at the same time and hold for twenty seconds.
sandy
December 18, 2020
What kind of code would it show for engine light
Lester L.
April 9, 2020
To reset the check engine light on a 2012 ford focus you should take the following steps: locate the diagnostic input jack. Open the panel covering the input jack and plug in the scanner. Turn on the scanner if it does not power up automatically. Turn on the car's engine. Observe the scanner's screen for the car's trouble codes.
Linda sue
March 10, 2023
I have a 2012 ford focus se and tried everything to get the engine light to go off but the battery cable im afraid iwill not be able to reconnect it properl then im stuck? I’m Marrying mechanic if all possible next time.Is it easy to Get back on
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.