The 2015 Chrysler 200 is equipped with a tire pressure monitoring system or TPMS that measures pressure in Your tires and sends the readings to the car. This system will display a low tire pressure message and it will also indicate which tire is under-inflated and all four tire pressures. Once these warnings have been activated, it means that one or more of Your tires are underinflated and need to be inflated to the manufacturer's recommended 33 PSI tire pressure. Even if the light turns on for a short time and then turns off, the tire pressure still needs to be checked. Tire pressures change with air temperature, keep this in mind when checking pressures in the winter. The system resets itself when the tire is properly inflated. You may have to drive for up to 20 minutes for the system to reset the warnings.
Antwon
March 9, 2022
So where is the Tpms button located?
Isaac
January 2, 2023
Cant find the Tpm reset button on my crysler 200. It's under the wheel as far as I can tell
Ismael N
July 30, 2020
To reset the Chrysler 200 tire pressure sensor you will start by click the ignition "on" button without starting the engine. Click the TPMS reset button and keep it on until the light flashes three times, then release it. Start the car and let the sensor work for 20 minutes. Normally, you can consider the tire pressure indicator reset button under the steering wheel.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.