If the 2012 Dodge Ram 1500 radio has no sound then the fuse to the speakers has likely died. To get to the fuse box look to the left of the steering wheel look for a small seam or crack along the dash. Using a screwdriver or prybar You will want to pop this open. On the inside, You will find a bunch of fuses. On the back of the panel that You pulled open, You will see a diagram that will show You what each of the fuses is for. If this is not on the back of the panel then You can also find it in the owner's annual for the vehicle. Once You have figured out which fuse You need simply pull it out. The two sections that stick up should be connected by a thin strip of metal. If this has been broken then the fuse is no good and will need to be replaced. If this strip is there then the fuse is fine and can be popped back in. New fuses will cost You about 10 dollars, so they are pretty cheap.
Brock F
July 3, 2022
I have no sound on my radio. The volume doesn’t show up on the screen or anything. All the fuses are good nothing blown. I need some help guys. I’m lost
Sean B.
April 10, 2020
A bad volume knob or blown fuse can cause the radio to lose sound in the 2012 dodge ram 1500.
Dp
December 20, 2022
There is no fuse box on the inside of a 2012 ram 1500
Cody
December 25, 2022
Some guy says buy a ford.. Oh so I could have those problems.. ? Definitely not ill keep replacing my fuse LOL
Darrell
May 10, 2024
Which fuse in the fuse box is for the speakers or soundfor the radio
I was told that the problem is inside a radio there’s a real small chip in there you gotta replace
Bryon
November 2, 2022
Buy a Ford
RR
August 28, 2022
Buy another radio, that on was cheap from factory, from what I was told, I bought a new one upgraded from Amazon and it's great!
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.