The 2016 Ford F-150 with the EcoBoost 2.7L engine has an oil capacity of 6.0 quarts. Ford recommends using Motorcraft SAE 5W-30 Premium Synthetic Blend Motor Oil. As part of You regular maintenance routine, You should check the oil level every time You put gas in the tank. Park the car on a level surface and let the oil drain for at least 15 minutes. Remove the dipstick and wipe it clean. Insert it back in all the way and remove it again. Make sure the oil level is between the top and bottom holes. If it is below the bottom one, add enough oil to bring it into the normal range.
Mark
May 30, 2020
Seven qts u dumbass
Rafe
June 1, 2020
Wow. It's 6 qts but you get called a dumbass for answering the question correctly?
But as a side note to previous answer you have to wait up to 5 mins for oil drain to pan to get correct level. It is not as quick as pour in and check on both the 3.5 and 2.7 ecoboost.
Stanley E.
April 9, 2020
The 2.7L ecoboost v6 has a total engine oil capacity of six quarts including the oil filter capacity.
Per Ford's Technician Page. Lubricants Specification Motorcraft® SAE 5W-30 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W-30 Super Premium Motor Oil (Canada) XO-5W30-QSP (US); CXO-5W30-LSP12 (Canada) Engine Oil Capacity Specification Service fill including oil filter 6.0 qt (5.68 L)
Mike
September 12, 2021
It is 6 qts.
david
August 15, 2022
Its not 6 or 7 its 5.7 quarts
Abram
December 15, 2022
Mine def takes more than 6 or my dipstick is wrong. Usually takes 7
Den
February 22, 2022
The book says 5w-20 in a synthetic blend.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.